Owner Manual

3-6

HOLE CLOSEOUT BRACKET KIT

10. With the dispenser still removed from the

unit, peel the paper backing off one Panduit

Adhesive Cable Clip and adhere it to the back

right side of the NMD50 dispenser. Peel the

paper backing off another Panduit Adhesive

Cable Clip and adhere it to the front right side

of the NMD50 dispenser. Note the orientation

of the clips in the pictures.

8. Ensure the bolts are not intertwined in the cables

in the lower cabinet.

9. Install the second closeout bracket on the bolts

in the lower cabinet. Using the 7/16” hollow

shaft nut driver, install the 6 hex nuts on the

bolts. While tightening, ensure the bolts and

bracket are sitting ﬂ at in the upper cabinet.