Owner Manual

3-2
HOLE CLOSEOUT BRACKET KIT
REQUIRED PARTS AND TOOLS
TOOLS REQUIRED
USB fl ash drive
7/16” hollow shaft nut driver
Possible additional tools required:
- #2 Phillips screwdriver
- Side cut pliers
KIT 06200-08211
Hole Closeout Bracket Kit
For added security measures, Triton recommends the installation of
the Security Module Upgrade Kit prior to the installation of the Hole
Closeout Bracket Kit.
If the unit has not been upgraded, additional parts may be needed
dependent on the cabinet part number / serial number.
Description Qty
Closeout Bracket 2
1/4-20 Nylon Lock Hex Jam Nut 6
1/4-20 x 1.25 Steel Carriage Bolt 6
Cable Clip|3/4" Round, Screw-In|Quick Release| ROHS 3
Nut|#8-32|Hex Nut|Ext. Tooth Washer ROHS 3
Screw|#8-32|3/8 Inch|Pan Phil Head w/Ext Tooth Wash| ROHS 3
6 Inches TY Wraps ROHS 3