Owner Manual

2-19
RL5000 SDD
14. Plug the cables into the back of the SDD
dispenser and tighten the thumbscrews on the
communication cable to secure it. Reinstall
the dispenser into the unit.
15. Route the security module communication and
security module power cable around the unit’s
main power cable and over the power supply
(red arrows). Plug the power cable into the
power supply.
Ensure all excess security module power and
communication cable is pulled into the upper
cabinet. Loop the security module power
cable back on itself to condense the length of
the cable. TY Wrap the cable and cut off the
excess (blue box). TY Wrap the cables on the
side of the power supply and cut off excess
(green arrow).