Owner Manual

2-18

HOLE CLOSEOUT BRACKET KIT

11. Install the lower closeout bracket on the bolts

in the lower cabinet. Using the 7/16” hollow

shaft nut driver, install the 6 hex nuts on the

bolts. While tightening, ensure the bolts and

bracket are sitting ﬂ at in the upper cabinet.

12. Reinstall the cable clip over the closeout

bracket as shown.

13. Install the second lower closeout bracket on

the bolts in the lower cabinet. Using the 7/16”

hollow shaft nut driver, install the 6 hex nuts

on the bolts. While tightening, ensure the bolts

and bracket are sitting ﬂ at in the upper cabinet.

(picture shown with all clips and additional

hardware removed from cabinet for clarity)