Owner Manual

2-12
HOLE CLOSEOUT BRACKET KIT
RL 5000 with Cabinet # 03015-00793 / 03015-00833 / 03015-01340 /
03015-00852 / 03015-00900 with an SDD Dispenser
**If the unit has been upgraded with a security module, skip to step #8.
5. Feed the security module power cable and
the communication cable through the front
left opening into the lower cabinet. Route the
cables through the quick release cable clip and
plug them into the security module.
6. Obtain the dispenser power cable. Plug the
power cable into the unit’s power supply in the
upper portion of the cabinet. Route the cable
through the left hole opening into the lower
cabinet.
7. Route the dispenser communication cable
down the front of the dispenser tray, through
the quick release cable clip and under the tray.
Pull all excess cable up from behind the tray
as shown.