Owner Manual

2-6

HOLE CLOSEOUT BRACKET KIT

8. Install the 6 bolts into one closeout bracket.

Set the closeout bracket in place into the

right opening as shown. Ensure the bolts and

bracket are sitting ﬂ at on the upper cabinet.

9. Ensure the bolts are not intertwined in the cables

in the lower cabinet.

10. Install the second closeout bracket on the bolts

in the lower cabinet. Using the 7/16” hollow

shaft nut driver, install the 6 hex nuts on the

bolts. While tightening, ensure the bolts and

bracket are sitting ﬂ at in the upper cabinet.