Owner Manual

5-29
SECTION 5 - MANAGEMENT FUNCTIONS
TRITON SYSTEMS, INC.
MODEL 9200 SUPERSCRIP
TM
OPERATION MANUAL
FUNCTION: CHANGE (SECURITY CODE)
FACTORY DEFAULT: N/A
ACCESS INSTRUCTIONS:
1.) Select SECURITY CODE from the options
available at the MANAGEMENT FUNCTIONS
main menu screen.
2.) Select the CHANGE option.
DESCRIPTION:
The current SECURITY CODE is stored in the terminal and printed on each receipt for validation
purposes. Select the CHANGE option to enter a new SECURITY CODE.
To enter a digit 0-9, simply press the key that has that digit. To enter a letter, first press the <BLUE>
key, then press the key that has the letter you want on it. The first press of the key will display the
first character above the number. Subsequent presses will display the characters in sequence.
When the character you want is displayed, press the <RIGHT ARROW> key to ‘lock in’ the letter.
If your next character is a letter, you must press the <BLUE> key again.
The SECURITY CODE can be up to 6 characters long.
ERROR CONDITIONS:
There are no error conditions directly associated with this function