Owner Manual

5-116
SECTION 5 - MANAGEMENT FUNCTIONS
TRITON SYSTEMS, INC.
MODEL 9200 SUPERSCRIP
TM
OPERATION MANUAL
FUNCTION: SET TIME
FACTORY DEFAULT: N/A
ACCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Choose DATE/TIME FUNCTIONS.
3.) Select SET DATE / TIME.
4.) Select SET TIME...
DESCRIPTION:
The time is entered in the form ‘HH:MM:SS’ (hours, minutes, seconds). Do not enter the ‘:’
characters separating the fields, just the fields themselves. Press CLEAR to erase everything and
start over. Press the BACKSPACE key to back up and erase a single character. Press QUIT to
escape without doing anything. Press SET TIME to load the entered time into the clock.
The Terminal will not let you enter an invalid number for hours or minutes. The clock will properly
handle the rollover to the year 2000.
ERROR CONDITIONS:
There are no error conditions directly associated with this function.