Owner Manual

5-52
SECTION 5 - MANAGEMENT FUNCTIONS
TRITON SYSTEMS, INC.
MAKO CASH DISPENSER OPERATION MANUAL
FUNCTION: WELCOME MESSAGE
FACTORY DEFAULT: ‘WELCOME TO miniATM’
ACCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGURATION from
the MANAGEMENT FUNCTIONS menu.
2.) Select CHANGE MESSAGES.
3.) Select Welcome Message.
DESCRIPTION:
The Welcome Message consists of three lines of text that are printed at the top of the customer
welcome screen. The text can be full alphanumeric text. Enter letters, numbers and punctuation as
follows:
The keys along either side of the display are
used with the numeric keys on the main keypad
to permit entry of alphanumeric characters. The
keys on the left side of the display are
designated <F1> through <F4>. The keys on
the right side of the display are <F6> through
<F8>. The <F1> key centers the text on the
line where the cursor appears. The <F2> key
erases all text in the current message. <F3>
clears the text on the line the cursor is currently
appearing.
The <F4> Key is used similarly to a CAPS
LOCK key on a computer keyboard. Pressing
the <F4> key toggles between uppercase and lowercase. To enter an alphabetic or punctuation
character, one of the <F6> through <F8> keys must be pressed, followed by one of the numeric
keys. The resultant character will be as indicated in the table. Press the <OK> key to save the
changes made. If you make a mistake and want to start over, press the CANCEL key to discard any
changes made to that point.
ERROR CONDITIONS:
There are no error conditions directly associated with this function.
YEK
4F
REPPU
1
2 3 4 5 6 7 8 9 0
tfihSoN 1234567890
tfeL6FQADGJMPTW,
retneC7F ZBEHKNRUX .
thgiR8FpSCFILOSVY-
4F
REWOL
tfihSoN!@#$%^&*()
tfeL6Fqadgjmptw’
retneC7Fzbchknrux+
thgiR8F&cfilosvy=