Owner Manual

SECTION 5 - MANAGEMENT FUNCTIONS
5-65
TRITON SYSTEMS, INC.
MAKO CASH DISPENSER OPERATION MANUAL
To enter or change an ISO go to the SELECT ISO TO CHANGE screen and perform the following:
1.) Press the Screen Key next to the block where the new ISO will be entered or an ISO changed.
2.) Enter the ISO number (up to six digits in length).
3.) Press the “<OK>” key.
If more than one ISO must be entered repeat steps 1 through 3 until all ISO are entered (up to five
ISO numbers may be entered using this screen).
ERROR CONDITIONS:
There are no error conditions directly associated with this function.