manual
Triton Systems ©
93
(/)
is function allows user to view and congure communication settings for the host processor.
1. Navigate to Management Functions > Terminal Conguration.
2. Press Communication.
3. Press Protocol. Press desired option to toggle on (check mark), then press Save and Return. is option
allows selecting the host processor’s communication requirements (dial-up, TCP/IP. etc.). Set as recom-
mended by host processor. e other communication options will adjust accordingly.
4. Press Message Format. Press desired option to toggle on (check mark), then press Save and Return. is
function species the content and structure of messages that pass between the terminal and host processor
during a customer transaction. Set as recommended by host processor.
5. Press Primary Host Address. Using the on-screen keypad, enter host address as directed by host proces-
sor, then press Save and Return. is IP address is used to contact the host processor during customer
transactions. Information will be entered in this format: hostaddress:port.
6. Press Backup Host Address. Using the on-screen keypad, enter host address as directed by host processor,
then press Save and Return. is IP address is used to contact the host processor during customer trans-
actions.
7. Press Permanent TCP/IP Connection to toggle on (check mark) or o (no check mark) as directed by
host processor. When enabled, the terminal will stay connected to host processor aer each transaction.