manual
Triton Systems ©
90
/
is function allows user to set surcharge type and amount, as well as add or delete ISO numbers.
1. Navigate to Management Functions > Terminal Conguration.
2. Press ISO/Surcharge Properties.
3. Press Withdrawal Surcharge.
— Press Enable Surcharge to toggle on (check mark) or o (no check mark). This function allows
a terminal fee to be imposed on any customer transaction.
— Press Amount. Use the on-screen numeric keypad, enter the desired surcharge, then press Enter
and Return. This function allows user to set the xed amount that will be charged. This amount
will be displayed to the customer in the surcharge notication message.
— Press Percent. Use the on-screen numeric keypad to enter the surcharge percentage, then press
Enter and Return. This function enables user to set a surcharge based on the customer withdraw-
al amount.
— Press Use Whichever Is: to choose between lesser or greater, then press Save and Return. This
function is used with the surcharge Amount and Percent, and allows user to select either the small-
er of the two amounts or the larger of the two amounts to apply to customer transactions.
4. Press Balance Inquiry Surcharge to enable. is function is only available for Australia.
5. Press Allow only ISOs listed as “Accept” to toggle on (check mark) or o (no check mark). When en-
abled, this function only allows transactions with ISO numbers listed.
6. Press Add New while Allow only ISOs as “Accept” is enabled.
7. Press ISO Number. Using the on-screen numeric keypad, enter desired ISO number, then press Enter and
Return.
**Note**
Available options may vary depending on soware version.
8. Press Action to determine what action will be applied to transactions that use the displayed ISO numbers.
Available options include:
— Block Surcharge: This functions allows free (no surcharge) transactions for customer cards with
the displayed ISO numbers.