manual

Triton Systems ©
83
9. Press Out of Service on Low Paper to toggle on (check mark) or o (no check mark). is function allows
the user to choose if the terminal will automatically go out of service when low receipt paper is detected,
or if it will remain in service.
10. Press Out of Service on Printer Error to toggle on (check mark) or o (no check mark). is functions
allows the user to choose if the terminal will automatically go out of service when a printer error occurs,
or if it will remain in service. If this option is toggled o (no check mark), a pop-up dialog will notify the
customer that a receipt will not be printed if an error occurs.
11. Press ATM Monitoring to congure the operational status information sent to host processor. Do not
attempt to alter these properties unless certain of the results. Incorrect settings may cause communication
failure. Settings or changes in this menu are advanced conguration options, and should be provided by
host processor.
— Press Status Monitoring to enable, disable, or choose advanced monitoring options. When en-
abled, this function sends status information to the host processor during the following message
types: any customer transaction request, working key download, host totals download request, or
a reversal request.
— Press Heartbeat Message to toggle on (check mark) or o (no check mark). When enabled, this
function initiates a working key download to the host processor at a set interval. This allows the
processor to determine if a terminal is in operation.
— Press Heartbeat Delay Period when Heartbeat Message is enabled. Using the on-screen numeric
keypad, enter the heartbeat delay period (1-999 minutes), then press Enter and Return. This func-
tion will initialize the Heartbeat Message operation at the interval set.
— Press Journal Upload to toggled on (check mark) or o (no check mark). This function initiates
a journal upload to the host processor during any host communications.
— Press Enable Time-Specic Heartbeat to toggled on (check mark) or o (no check mark). This
function will initialize the Heartbeat Message operation at a specic hour and minute of each day.
— Press Hour of Day when Enable Time-Specic Heart beat is toggled on (check mark). Use the
on-screen numeric keyboard to set desired hour (0-23) for terminal to initialize the Heartbeat
Message operation. Press Enter and Return.
— Press Minute of Day when Enable Time-Specic Heart beat is toggled on (check mark). Use the
on-screen numeric keyboard to set desired minute (0-59) for terminal to initialize the Heartbeat
Message operation. Press Enter and Return.
12. Press Save and Return to save changes and return to the previous menu.