manual
Triton Systems ©
53
is function allows the list of individual certicates to be enabled or disabled. Check with host processor to
determine if required.
1. Navigate to Management Functions > Diagnostics > Modem/Ethernet.
2. Press Certicate Whitelist.
3. Use the Page Up and Page Down buttons to navigate the list.
4. Press Enable/Disable to toggle on (check mark) or toggle o (no check mark) desired certicate.
5. Press Save and Return to save changes and return to the previous menu.
()
is function generates a report showing the current hardware status, serial number, version number, and
loaded encrypted key check digits.
1. Navigate to Management Functions > Diagnostics > Keypad.
2. Press Device Status.
3. Report is displayed on screen. Use Page Up and Page Down buttons to navigate through report. Press
Print to print a hard copy via the receipt printer, or press Save To File to save on a USB drive.
4. When report has been printed or saved, press Back button to return to the previous menu.
()
is function allows user to verify operation of the T9 keypad and the on-screen command buttons.
1. Navigate to Management Functions > Diagnostics > Keypad.
2. Press Test.
3. Press Screen Button 5, Screen Button 6, Screen Button 7, and Screen Button 8 to verify LCD buttons are
working properly. Each button will appear on screen if operating.
4. Press all buttons except ENTER on the T9 keypad to verify keypad is functioning properly. Each button
will appear on screen if operating.
5. Press Enter on T9 keypad to complete button test and return to previous screen.