manual

Triton Systems ©
49
 
is function allows user to change the modem parameters. Do not attempt to alter these properties unless
certain of the results. Incorrect settings may cause communication failure. Settings or changes in this menu
are advanced conguration options, and should be provided by host processor.
**Note**
e options available may vary depending on soware installed. In 4.0 soware, steps 2 - 6 will be performed
in the Port Settings/Call Options menus that appears on screen aer choosing the modem model.
1. Navigate to Management Functions > Diagnostics > Modem/Ethernet > Congure Modem.
2. Press Baud Rate to select the desired baud rate. is option determines the speed in which the main board
talks to the modem.
3. Press Data Bits to select the amount of data bits used.
4. Press Parity to choose an even or odd parity type.
5. Press Stop Bits to select the amount of stop bits used.
6. Press Modem Setup String to alter the initialization string.
7. Press Advanced Options to alter the port settings and call options.