manual

Triton Systems ©
39
    ( )
is function allows the user to inject a new ID into a cassette. e NMD dispensing mechanisms use cas-
settes that possess internal memory which enables a cassette to store its own identication code.
e Inject New Cassette ID function has no direct correlation to the physical position of the cassette within
the dispenser. In most cases, cassette A will be placed in the top feed channel, cassette B in the second, and so
on. is is not a requirement for NMD cassettes since the ID code allows the dispenser to locate the cassette
where ever it is placed.
1. Navigate to Management Functions > Diagnostics > Dispenser.
2. Press Inject New Cassette ID.
3. Press desired cassette (A, B, C, D) you wish to rename.
4. Remove cassette from top feed channel.
5. Insert cassette (A, B, C, D) you wish to rename into top feed channel.
6. Press Enter to begin operation.
7. At prompt, remove cassette from top feed channel and place in desired slot.
8. Press Enter to continue.
9. Press Enter at completion prompt to return to the previous menu.
10. Repeat step 2 through step 9 for each desired cassette.
Caution
Multiple amount should be congured for each renamed cassette aer injecting a new cassette ID. User must
then return desired cassettes to service via Management Functions > Diagnostics > Dispenser > Cassette Param-
eters.