manual

Triton Systems ©
21
 
is function is used to enable/disable and/or set times for automatic day closes.
1. Navigate to Management Functions > Terminal Close Functions > Schedule Close.
2. Press Enable Schedule to toggle option on (check mark) or o (no check mark).
3. If Enable Schedule is toggled on (showing a check mark), press Set Time.
**Note**
Use the < and > buttons on the numeric on-screen keypad to toggle between the hour, minute, and second.
e Le and Right buttons perform the same function.
4. Use the on-screen numeric keyboard to set desired time for terminal to perform a scheduled close.
5. Press Enter and Return to save changes and return to previous menu.
6. Day of the Week option is automatically set to Every Day. Press Save and Return to save changes and
return to previous menu.