manual

Triton Systems ©
103
ing in the EMV card reader, and is only available when EMV Processing is enabled.
— Press Non-ICC Transactions to toggle on (check mark) or o (no check mark). This option
allows terminal to process magnetic stripe-only transactions while EMV Processing is enabled.
— Press ICC Fallback to Magnetic Stripe to toggle on (check mark) or o (no check mark). This
option allows the terminal to process a card as a magnetic stripe transaction if the IC on the card
fails when EMV Processing is enabled.
— Press EMV Journal Entries to toggle on (check mark) or o (no check mark). This option directs
the terminal to record extra data that is received/transmitted during an EMV transaction to the
journal for dispute resolution.
— Press Terminal EMV Conguration to generate a management report that contains current EMV
kernel settings and terminal EMV conguration. Report is displayed on screen. Use Page Up and
Page Down buttons to navigate through report. Press Print to print a hard copy via the receipt
printer, or press Save To File to save on a USB drive. Press Back to return to previous screen.
— Press Last Transaction’s EMV Data to generate a management report that contains current EMV
kernel settings and EMV data from the last transaction. Report is displayed on screen. Use Page
Up and Page Down buttons to navigate through report. Press Print to print a hard copy via the
receipt printer, or press Save To File to save on a USB drive. Press Back to return to previous
screen. This data will not be available if terminal has been rebooted since last EMV transaction.
6. Press Electronic Receipt Host Cong to view or congure the electronic receipt settings. is option is
only available for touch-screen ATMs.
— Press Enable Electronic Receipts to toggle on (check mark) or o (no check mark) to activate
electronic receipt features.
— Press Host Address. Users should not change this option. Using the on-screen keyboard, enter the
host address used to contact the electronic receipt host for transaction requests. This information
is provided by the electronic receipt host.
— Press Host Port. Users should not change this option. Using the on-screen keyboard, enter the
port number used to contact the electronic receipt host for transaction requests. This information
is provided by the electronic receipt host.
— Press Enable SMS to toggle on (check mark) or o (no check mark). This function allows elec-
tronic receipts to be sent via text message to a customer’s cellular phone. Data rates and other
charges may apply.
— Press Host Response Timeout. This function determines how long the terminal will await re-
sponse from the host before closing the connection. Using the on-screen numeric keypad, enter
desired number of seconds between 0 - 1000.
— Press Electronic Receipt Heartbeat Interval. This function determines the time interval be-
tween heartbeat messages. Using the on-screen numeric keypad, enter desired number of minutes
between 0 - 999.
— Press Enter Host Password. This function allows user to enter the password that will be used to
authenticate the ATM terminal to the electronic receipt host. Setting an incorrect password will
cause communication failure. Press Enter at warning screen, then use on-screen keyboard to enter
the host password. Press Enter and Return to save entry and return to the previous screen.
— Press Test Host Connection. This function will connect to the host to verify communication.
Press Enter to initiate test connection.
7. Lotto Conguration. is option is currently unavailable.
8. Press Conguration Wizard. is wizard directs user through initial setup of the terminal. See the Con-
guration Wizard chapter for more information.
9. Press More Options.
— Charity. Option currently unavailable.
— Cardless Host Cong. Option currently unavailable.
— Press Anti-Skim Cong to view or congure the anti-skim card reader. Anti-skim card readers
use two forms of detection techniques: dierential voltage and temperature corrected. Categories
for both types should be lled in.
— Press Metal Present Time (sec) for dierential voltage. is is the time for which metal must be
continuously detected to be considered a skimmer. Set to 0 seconds to disable.