manual
Triton Systems ©
61
For your convenience, the video Changing the Combination on an Electronic Lock with Swing Bolt by Triton
Systems/ATMGurus is available on you YouTube.
Caution
Always perform this operation with the door open. Test new/changed combination several times before closing
door. To change the combination, follow the steps below:
**Note**
Aer each key press, the lock will beep. Aer the nal digit is entered, the lock will beep twice. A triple beep
signals an invalid entry. If a mistake is made, wait 30 seconds, then repeat steps 1 - 3.
1. Enter 0-0-0-0-0-0 (six zeros).
2. Enter the current combination. Factory default setting is 1-2-3-4-5-6.
3. Enter the new six-digit combination twice.
4. Test new combination several times with the door open.
For your convenience, the video Changing the Combination on an Electronic Lock with Swing Bolt by Triton
Systems/ATMGurus is available on YouTube.