Guide

Triton Systems ©
2
 
 
1. At ATM welcome screen, press and hold the <CTRL> key (blank
key at bottom, right corner of keypad), press the 1 key, then release
both keys. e Management Functions log on screen will be dis-
played.
2. Enter user ID and password, press Enter. e Management Func-
tions main menu is displayed.
 
Follow access instructions to enter Management Functions menu.
Begin the Conguration Wizard via Management Functions > Termi-
nal Conguration > More Options > Conguration Wizard. is func-
tion walks user through basic conguration of an ARGO FT ATM. Aer
completion, the ATM is ready to go into service.
  
Follow access instructions to enter Management Functions menu.
Change password(s) via Management Functions > Password Maintenance
> Change User Password. is function allows the currently logged in
user to change their password. For example, this function changes the
master password if user is logged in with the master user ID of 00.
 /  
Follow access instructions to enter Management Functions menu.
Restart terminal via Management Functions > Systems Parameters > Re-
start the Terminal. is function reboots the terminal.
Shutdown terminal via Management Functions > Systems Parameters >
Shutdown the Terminal. is function powers down the terminal oper-
ating system. When prompted that shutdown is complete, turn power
switch to the o (O) position.