Guide

ManualsBrandsTriton Systems ManualsOtheriOS/Android ManualsARGO FT

QUICK GUIDE

tagline, Triton®, and the Triton logo are all registered trademarks of Triton Systems of Delaware, LLC. e

third party trademarks that may be identied herein are the trademark of their respective owners. Triton dis-

claims any aliation, connection, or association between its products and services, and those of the respective

trademark owners, or any sponsorship or approval of its products and services by such trademark owners.

TDN 07103-00278

Summary of content (6 pages)

PAGE 1
QUICK GUIDE ©2017 Triton Systems of Delaware, LLC. All Rights Reserved. ATMGurus®, the ATMGurus logo and tagline, Triton®, and the Triton logo are all registered trademarks of Triton Systems of Delaware, LLC. The third party trademarks that may be identified herein are the trademark of their respective owners.
PAGE 2
revision history management functions 1. At ATM welcome screen, press and hold the key (blank key at bottom, right corner of keypad), press the 1 key, then release both keys. The Management Functions log on screen will be displayed. 2. Enter user ID and password, press Enter. The Management Functions main menu is displayed. configuration wizard Follow access instructions to enter Management Functions menu.
PAGE 3
diagnostics Follow access instructions to enter Management Functions menu. Purge dispenser via Management Functions > Diagnostics > Dispenser > Purge. This instructs the dispenser to remove any notes (jams) in the feed path. Perform a test dispense via Management Functions > Diagnostics > Dispenser > Test Dispense. This instructs the dispenser to dispense a minimum of one note from each installed cassette into the reject bin or cassette.
PAGE 4
close functions Follow access instructions to enter Management Functions main menu. Perform a day close procedure via Management Functions > Terminal Close Functions > Day Close. This option is used to complete daily balancing of the ATM with the processor. Totals are cleared and counting begins for the next business day. Perform a trial close via Management Functions > Terminal Close Functions > Trial Close. This function performs a close, but totals are not cleared.
PAGE 5
unlock the electronic combination lock business hours cabinet The electronic lock combination consists of six digits. Upon arrival, the combination is set at the factory default setting of 1-2-3-4-5-6. To open electronic lock, follow the steps below: **Note** After each key press, the lock will beep. After the final digit is entered, the lock will beep twice and the 4-second open period will begin. 1. Enter the six-digit combination. If successfully entered, the lock will beep twice. 2.
PAGE 6
**Note** Level the notes. Single notes should not protrude from the bundle. Make sure the bundle leans evenly against the plate. 5. Place the currency into the cassette. Allow at least one inch of clearance between the retracted packer plate and the currency. This will allow the packer plate to compress the currency. Do not overfill. 6. Release the packer plate against the notes. 7. Extended the white pawls on each side of packer plate. 8. Close cassette lid.