Owner Manual

148
MODEL RL/FT5000
XP
USER MANUAL
SAV E PARAMETERS TO EXTERNAL STORAGE
ACCESS INSTRUCTIONS:
1. From the M
AIN MENU screen, select the TERMINAL STATUS option by press-
ing number <8> on the keypad.
2. From the TERMINAL STATUS screen, select the SAV E PARAMETERS TO EXTER-
NAL STORAGE by pressing number <2> on the keypad.
DESCRIPTION:
The SAV E PARAMETERS TO EXTERNAL STORAGE allows user to save the current
terminal parameters to an external storage device that is attached to an available
USB port on the computer. Should it become necessary to restore the param-
eters, the “Restore Parameters from External Storage” function can be used to
quickly configure the terminal with saved parameters.
This procedure requires you to attach an external storage device such as a pin
drive to one of the USB ports on the computer. To save parameters to the device:
 Open the control panel (RL
XP
) or cabinet sleeve door (FT
XP
).
 Locate one of the USB port connectors. Install the external device into
an available USB port connector. Close the control panel (RL
XP
).
 Press <3> on the keypad. At the confirmation dialog, select <Enter> to
save the terminal parameters to the device.