Owner Manual
2-5
FT5000
12. Route the communications and power cables for your dispenser. Place the cables back into the split
loom. Failure to ensure the cables are routed and secure will increase the possibility of damage. Use
the TY Wraps as necessary.
11. Mount the bracket and security module assembly
to the cabinet. Attach with the supplied
hardware, bolts or nuts. Your attachment may
be on the left or right side roof of the cabinet.
(right side installation shown)
Right side cable routing to
upper cabinet
Left side cable routing to
upper cabinet.
13. Route the communications and power cables from the Security Module to the upper cabinet. Place
the cables back into the split loom. Failure to ensure the cables are routed and secure will increase the
possibility of damage. Use the TY Wraps as necessary.