Owner Manual

1B-32
EJ TO SECURITY MODULE UPGRADE PROCEDURES
14. With the dispenser still removed from the
unit, peel the paper backing off one Panduit
Adhesive Cable Clip and adhere it to the back
right side of the NMD50 dispenser. Peel the
paper backing off another Panduit Adhesive
Cable Clip and adhere it to the front right side
of the NMD50 dispenser. Note the orientation
of the clips in the pictures.
15. Peel the paper backing off one Panduit
Adhesive Cable Clip and adhere it to the front
left side of the NMD50 dispenser. Note the
orientation of the clips in the pictures.
16. Remove the cassettes from the NMD50 if
installed. Pull both slides out fully and ensure
they lock into place. Set the dispenser into
position ensuring the posts on the rails sit
securely in the handle’s notches. Reinstall the
cassettes.