Owner Manual

1B-30
EJ TO SECURITY MODULE UPGRADE PROCEDURES
Vault # 03015-00798 / 03015-00212 / 03015-00841 with an NMD 50
Dispenser
Side Wall Mounting
8. Insert the two posts on the cabinet wall into
the two notches on the bottom of the security
module as shown.
9. Gently push the security module down fl exing
the plastic ends slightly. Insert the single post
on the cabinet wall into the notch on the top
of the security module as shown. Ensure the
security module is sitting fl ush against the
cabinet wall.
10. Install a quick release cable clip with one
02054-00169 screw to the back left wall of
the vault as shown.