Owner Manual

1B-26
EJ TO SECURITY MODULE UPGRADE PROCEDURES
14. Obtain the dispenser power cable. Plug the
power cable into the unit’s power supply in the
upper portion of the cabinet. Route the cable
through the anti-phishing bracket and the left
hole opening into the lower cabinet.
Reinstall the two washers and two bolts to secure
the anti-phishing bracket.
15. With the dispenser still removed from the
unit, peel the paper backing off one Panduit
Adhesive Cable Clip and adhere it to the back
right side of the NMD50 dispenser. Peel the
paper backing off another Panduit Adhesive
Cable Clip and adhere it to the front right side
of the NMD50 dispenser. Note the orientation
of the clips in the pictures.
16. Peel the paper backing off one Panduit
Adhesive Cable Clip and adhere it to the front
left side of the NMD50 dispenser. Note the
orientation of the clips in the pictures.