Owner Manual

1B-25
RL5000
11. Mount the assembly onto the two posts on the
back wall of the inner vault with two 1/4-20
Hex Jam Nuts as shown. Ensure the cable
connections face down.
12. From the upper portion of the cabinet, remove
the two bolts & two washers that secure
the anti-phishing bracket. Set aside for
reinstallation.
13. Route the security module power cable and
security module communications cable through
the rear upper middle cable clip on the top of
the vault. Continue routing the cables past the
back opening (green circle) and through the
upper left cable clip. Route the cables into the
upper portion of the cabinet through the left hole
opening and the anti-phishing bracket.