Owner Manual

1B-7
RL5000
11. Mount the assembly onto the two posts on the
right side of the inner cabinet with two 1/4-
20 Hex Jam Nuts as shown. Ensure the cable
connections face towards the cabinet door.
13. Obtain the dispenser power cable. Plug the
power cable into the unit’s power supply in the
upper portion of the cabinet. Route the cable
through the left hole opening into the lower
cabinet.
12. Route the security module power cable and the
security module communication cable through
the upper back middle cable clip and the upper
left front cable clip as shown. Route the excess
power and communication cable into the upper
cabinet through the left hole opening.