Installation instructions

8
HIGH BRIGHT DISPLAY CCFL TO LED BACKLIGHT REPLACEMENT
7. Gently lift the two tubes out of the end of the rail using the pink wires. BE CAREFUL not to break the tubes
as there is a small amount of mercury inside.
8. Using the small pliers, bend the end tab of the rail 90° to make it fl ush with the rail. Cut the wires as
close to the tab as possible. Set the bulbs aside.
9. Bend the end tab of the rail back up to a 90° angle.
REPLACING THE CCFL BACKLIGHTS WITH THE LED
BACKLIGHTS APOLLO DISPLAY cont...