Owner Manual

This Page Left Intentionally Blank
MODEL FT5000 USER MANUAL
B-4
6. To advance the receipt paper, press
the CONTROL key first (blank key),
then the number (4) key (Figure 6).
7. To initiate a manual cut of the
receipt paper, press the CONTROL
key first, then the number (5) key.
8. To adjust the contrast on the RSP
display, open the back panel and
locate the LCD CONTRAST ADJ
as shown in Figure 7. Slowly turn
the adjustment to the desired
brightness (Variable resistor
located on back of keypad circuit
board).
Figure 6. Receipt paper advance.
Figure 7. Contrast adjustment
location.