Quick Reference Guide

4
CASSETTE CLOSE FUNCTIONS
folloW Access instRuctions to enteR MAnAGeMent functions. select TERMINAL CLOSE FUNCTIONS.
select CASSETTE CLOSE.
select cAssette(s) to close. A check MARk (√ ) identi-
fies Which cAssette(s) ARe selected. pRess <enteR>.
note: if An nMd-50 dispenseR is instAlled, WAit foR the
cAssettes to unlock (this is done AutoMAticAlly).
ReMove And Replenish the selected cAssette(s).
pRoceduRes foR specific dispensinG MechAnisMs cAs-
sette ReplenishMent ARe on the folloWinG pAGes.
plAce selected cAssette(s) in seRvice. pRess <en-
teR>. note: the nmD-50 cassettes must be LockeD anD in
service for normaL operation.
note: if An nMd-50 dispenseR is instAlled, WAit foR the
cAssettes to lock (this is done AutoMAticAlly). pRess
<enteR> if ApplicAble.
enteR cAssette QuAntity (nuMbeR of notes, not
vAlue) foR the selected cAssette(s). pRess <enteR> to
Accept entRy. RepeAt foR eAch selected cAssette.
A close RepoRt is displAyed to be pRinted oR sAved.
this opeRAtion Will Reset the nuMbeR of bills in the
cAssette(s) to ZERO (0). pRess <enteR>.
AfteR cAssette(s) hAve been ReinseRted in the dis-
penseR, pRess <enteR>.
A tRiAl cAssette close RepoRt AutoMAticAlly is
displAyed to be pRinted oR sAved. pRint And RetAin A copy
foR stARtinG point RefeRence. pRess <enteR> to RetuRn to
close functions.