Quick Reference Guide

2
MANAGEMENT FUNCTIONS
- Access instRuctions -
1. At AtM WelcoMe scReen, pRess And hold doWn the <ctRl>
key (loWeR-RiGht coRneR of keypAd), pRess <1> key, then ReleAse
both keys. the top Menu Will be displAyed.
2. At the top Menu, select MAnAGeMent functions option. enteR
pAssWoRd And select <enteR>. the MAnAGeMent functions MAIN
MENU is displAyed.
DIAGNOSTICS
PURGE: this instRucts the dispenseR to ReMove Any notes (jAMs) in
feed pAth.
folloW Access instRuctions to enteR MAnAGeMent functions. select
DIAGNOSTICS > DISPENSER.
TEST DISPENSE: this instRucts the dispenseR to dispense minimum
one note fRoM eAch instAlled cAssette into the Reject cAssette/AReA.
RESET / TEST RECEIPT PRINTER: this instRucts the pRinteR to
Re-initiAlize And peRfoRM A test pRintout .
select DIAGNOSTICS > PRINTER.
RESTART / SHUTDOWN TERMINAL
RESTART TERMINAL: this function Reboots the teRMinAl.
folloW Access instRuctions to enteR MAnAGeMent functions. select
SYSTEM PARAMETERS.
SHUTDOWN TERMINAL: this function poWeRs-doWn the teRMinAls
opeRAtinG systeM. When pRoMpted thAt shutdoWn is coMplete, tuRn
on/off sWitch on poWeR supply to <off> position.