manual

SyStem ParameterS
91
DeSCriPtiOn:
Displays a statistical management report for the
following:
D available SyStem memOry- Memory (in
bytes) currently available for the system. The
terminal will go out of service if this value drops
below 3MB.
D available aPPliCatiOn memOry- Memory
(in bytes) currently available for the ATM
application. The terminal will go out of service if
this value drops below 3MB.
D tOtal memOry- Total memory (in bytes)
available for the system. This value is static and
will not change.
aCCeSS inStruCtiOnS:
From the System Parameters screen, select the Statistics option by pressing <8> on the keypad.
StatiStiCS
D available flaSh- Flash space (in bytes) currently available. The terminal will go out of service if
this value drops below 2 MB. Flash is used for storing journal, Ad graphics, screen les and any other
system les.
D tOtal flaSh- Total ash space (in bytes) available. This value is static and will not change.
D inStallatiOn Date/time- The date and time recorded when the terminal was initially activated.
D StartuP Date/time- The last date and time the terminal was restarted.
D terminal StartuPS- The number of terminal startups recorded.
D nOrmal ShutDOwnS- The number of normal shutdowns procedures (System Parameters>Shutdown
Terminal) recorded.
D abnOrmal ShutDOwnS- The number of abnormal shutdown (turning power supply off bypassing
“normal” shutdown procedure) recorded.