manual

SyStem ParameterS
89
SOftware uPDate
aCCeSS inStruCtiOnS:
From the System Parameters screen, select the Software Update option by pressing <7> on the keypad.
DeSCriPtiOn:
The Software Updates function will load/update the software components with the software le stored on
an external memory device. The update version must be greater than the current version running on the
terminal. If not, the unit will fall back to the current version.
NOTE: X2 equipped units use load le format Triton#.TFV extensions. X-Scale equipped units use load
le format Triton#.TLF extension. The terminal will not accept a load le it is not equipped for.
This step procedure describes how to perform a software update for the RL/FT5000/RL/RT2000. You will
need a Flash drive device (USB storage device) with the terminal software loaded in it.
1. Connect the USB external memory device to the Docking Board assembly (X-Scale) or the X2 Main
Board assembly (X2). Make sure to allow time for the memory device to be read by the terminal.