manual

76
X2 COnfiguratiOn manual
Date anD time
aCCeSS inStruCtiOnS:
From the Systems Parameters screen, select the Date and Time option by pressing <1> on the keypad.
DeSCriPtiOn:
The Date and Time function allows the user to set the
terminal date and time properties.
To set the Date:
D Press <1> on the keypad. Using the numeric
keypad, enter the date in the data entry dialog
box. Move between elds with the right and left
arrow keys. Press <enter> on the keypad when
complete.
To set the time:
D Press <2> on the keypad. Using the numeric
keypad, enter the terminal’s time in the data entry
dialog box. Move between the elds with the
right and left arrow keys. Press the <Ctrl> key
to toggle between AM and PM. Press <enter>
on the keypad when complete.
*The Advanced Settings function provides an alternative time/date change dialog but is primarily used to
change the terminal’s time zone and daylight savings properties.
Note: This option has been removed on software running X2 equipped units.
Use the following keys on the keyboard to navigate the date/time properties dialog:
<Clear>- This key lets you jump from section to section within a dialog. It functions like the Tab key on
a PC keyboard. Once a section is “active” (highlighted via a change in color or a dotted border), you can
select an option in that area.
arrOw < > keyS- Press these keys to cycle through the available options in an area.
<CTRL>- Press this key to change a checkbox option from the checked (enabled) and unchecked (disabled)
conditions.