manual
50
X2 configuration Manual
KeypaD
access instructions:
From the Diagnostics screen, select the Keypad option by pressing <8> on the keypad.
From the Keypad screen, select the Device Status option by pressing <1> on the keypad.
From the Keypad screen, select the Test option by pressing <2> on the keypad.
The Clear Serial # or Tamper Error function
may be accessed if you have encountered eiter a
SPED Serial # error (617 - usually when keypad
has been replaced) or if a Tamper condition
has occurred. Press option <4> (if available) to
attempt clearing either of these error conditions.
* note *
in the event the terminal displays Error
Codes ranging from 592-617 (keypad
specic), option <4> in the Keypad Functions
may be an available option. If it is, attempt to
clear the error by selecting this option.
Description:
The Device Status displays a management report that shows
information such as keypad status, serial number, version number, and
loaded encrypted key check digits.
The Test function enables you to verify operation of the numeric,
function, and control buttons on the terminal. Simply press any button
(except the <enter> button) and the status window will indicate the
state of the button: Up or Down. Press the <enter> when completed.