manual

Diagnostics
47
Description:
The Congure Ethernet Settings option allows the
terminal operator to perform the following functions:
1. IP Address- This address identies the terminal
as the course of the data packets sent to and
received from the host server.
B Change the IP Address by pressing <1> on the
keypad. Enter the new IP Address in the data entry
dialog box. Press <enter>.
2. Subnet Mask- Along with the IP Address, each
port requires a Subnet Mask address. This
distinguishes other terminals on the same Local
Area Network (LAN) from terminals in other
locations.
B Change the Subnet Mask by pressing <2> on
the keypad. Enter the new address in the data entry
dialog box. Press <enter>.
configure ethernet settings
access instructions:
From the Diagnostics screen, select the Modem/Ethernet option by pressing <7> on the keypad.
From the Modem/Ethernet screen, select the Congure Ethernet Settings option by pressing <6>
on the keypad.