manual

Diagnostics
45
configure MoDeM / triton connect settings
access instructions:
From the Diagnostics screen, select the Modem/Ethernet option by pressing <7> on the keypad.
From the Modem/Ethernet screen, select the Congure Modem option by pressing the <4> on the keypad.
For the Triton Connect Settings option, press the <5>.
* WARNING *
Do NOT attempt to alter any of the following parameters unless you are absolutely certain of the
result. Incorrect settings can cause communication failure.
Description:
The Congure Modem and Triton Connect Settings functions allow changing modem parameters.
Pressing the applicable key (<4> for Congure Modem and <5> Triton Connect Settings) will display the
Select Modem dialog. The name of the modem that will be congured is shown in the dialog.
B Press the <clear> key on the keypad until the <configure> button is hightlighted. Press the <enter>
key. The device properties screen is now displayed.
B Press the <clear> key until the parameter that will be congured is highlighted.
B If the parameter is enabled (checked), highlight the parameter and press the <ctrl> key to place or
remove a check from the box. If the parameter is selected from a list of choices, use the <clear> key to
highlight the parameter and the right arrow (>) and left arrow (<) keys to display the desired parameter.