manual

Diagnostics
43
Device status/test
access instructions:
From the Diagnostics screen, select the Modem/Ethernet option by pressing <7> on the keypad
From the Modem/Ethernet screen, select the Device Status option by pressing the <1> on the keypad.
From the Modem/Ethernet screen, select the Test option by pressing <2> on the keypad.
The Test function tests the terminal’s modem. Enter a known good telephone number, which the modem
will dial to verify its ability to access the telephone line and perform a dialing operation.
Use the text entry box to enter the phone number. Select
<enter> to start the test or <cancel> to ignore
the entry and exit the function. At the conclusion of the test, a message box will indicate success or failure
of the test.
Description:
The Device Status function displays a report that
shows the current operational parameters of the
modem (dial-up and TCP/IP).
This status is displayed in a management report dialog
which can be printed to the receipt printer or saved to
an external memory device.