manual

42
X2 configuration Manual
MoDeM / ethernet
access instructions:
From the Diagnostics screen, select the Modem/Ethernet option by pressing <7> on the keypad.
Description:
The Modem/Ethernet option allows the terminal operator to perform the following functions:
1. Device status- Displays a management report that shows properties of the modem’s (dial-up and TCP/
IP) parameters.
2. test- This function tests the modem by dialing a number that you enter in a dialog box. A status report
displays the progress and results of the operation.
3. MoDeM totals- Displays a management report showing the number of modem call attempts, busy
signals and aborted calls.
4. configure MoDeM- Enables you to view and congure the modem’s operating parameters.
5. triton connect settings- This function provides access to Triton Connect settings and conguration
parameters.
6. configure ethernet settings- This function enables you to view and congure TCP/IP (Ethernet)
settings.
7. MoDeM setup string- This function allows entering a non-standard setup string, if needed.