manual
Diagnostics
37
5. active cassette- Select the cassette that will receive the results of any changes to the various
cassette and note conguration parameters that are accessed via the cassette parameters dialog.
6. cassette in service (Multi-cassette Dispensers)- Places the currently selected cassette “In Service”
or “Out of Service”.
7. Multiple aMount- Set the denomination of the currency in a cassette.
8. DocuMent type- Enter the type of document in the selected cassette: cash or non-cash.
NOTE: SiNglE caSSETTE diSpENSErS aNd all TdMS arE alwayS SET fOr “caSh”.
9. non-cash iteM Description (nMD only)- Enter up to 28 characters describing the non-cash item in
the active cassette.
0. seconDary iteM Description (nMD only)- Enter up to 28 characters of general information about
the non-cash item in the active cassette or other information as required.
f1. note configuration- This function allows you to congure the note specic operating parameters
for the active cassette.
**note**
For further information on the individual Cassette Parameters, refer to Option 6, Terminal
Conguration>Cassette Setup>Cassette Parameters.