manual

30
X2 configuration Manual
Dispenser
access instructions:
From the Terminal Diagnostics screen, select the Dispenser option by pressing <4> on the keypad.
Description:
The Dispenser option allows the terminal operator to perform the following functions:
1.
cash Dispenser status- Displays a management report showing current dispenser hardware status.
2. purge- Performs a purge operation on the dispenser.
3. test Dispense- This function commands the dispenser to dispense a single note (min) from each installed
and active cassette into either the Reject cassette, compartment, or vault (dispenser specic). Shutter Test is
a functional test of the units’ dispenser shutter assembly and is exclusive to the FT5000 model.
4. inject neW cassette iD (nMD only)- This function allows the changing of the cassette(s)
identication.
5. force unlocK cassette (nMD only)- This function enables overriding the dispenser cassette locking
mechanism.
6. Dispenser totals- Displays a management report showing total number of documents dispensed.
7. reset Dispenser- This function rests ALL dispenser and cassette parameters to default values.
8. cassette paraMeters- Allows conguring cassette parameters (currency data, multiple amounts, etc).
9. clear Dispenser status report (tDMs only)- This function will reset the count in the Since Reset
column on the Dispenser Data report.