manual

Diagnostics
27
save paraMeters using an eXternal storage
access instructions:
From the Terminal Status screen, select the Save Parameters to External Storage option by pressing <6> on
the keypad.
Description:
The Save Parameters to External Storage function saves the current terminal parameters to an external
storage device (jump drive) atatched to a USB port.
1. Open the control panel. Install the jump drive to
any unused USB port.
2. Close the control panel. Select <7> on the
keypad. The prompt at right appears.
3. Locate the lename for the saved parameters.
Press “Enter” to select the highlighted le.
4. At the conrmation dialog, open the control panel
and remove the jump drive.
1. Open the control panel. Install the jump drive to
any unused USB port.
2. Close the control panel. Select <6> on the keypad.
The following prompts appear. Press “Enter” to
continue.
3. At the conrmation dialog, open the control panel
and remove the jump drive.
restore paraMeters using an eXternal storage
access instructions:
From the Terminal Status screen, select the Restore Parameters from an External Storage option by pressing
the <enter> on the keypad.
Description:
The Restore Parameters from External Storage function restores a previously saved set of parameters from
an external storage device (jump drive).