manual
22
X2 configuration Manual
Description:
the Diagnostics option allows the terminal operator to
perform the following functions:
1. terMinal status- Displays current terminal status,
conguration summary, and parameter save/restore
functions.
2. transactions totals- Displays terminal transaction
totals since the last Day Close.
3. systeM Diagnostics- Displays a dialog that allows
the terminal operating system properties to be viewed.
4. Dispenser- Allows user to check dispenser status,
perform diagnostics, and congure cassette parameters.
5. carD reaDer- Displays card reader status and test
functions.
6. printer- Displays printer status and test functions.
7. Modem/Ethernet- This function allows user to view
Modem/Ethernet device status, test functions, and congure if required.
8. KeypaD- Displays keypad status and tests terminal key functionality. When EPP (keypad) displays
tamper/serial errors, activates an option <4> to reset error.
9. general i/o Diagnostics- Provides access to perform diagnostics on LED indicators, audio output, and
headphone interrupts.
*0. tcp/ip Wireless- This function appears when the terminal is using TCP/IP wireless communication
as its protocol (Terminal Conguration > Communication setup). The available options provide signal
strength indication and connect/disconnect ability.
*NOTE: This option was available for wireless RL5000 units equipped with the LandCell wireless modems,
which Triton no longer offers. For wireless-capable option, contact your account representative.
Diagnostics
access instructions:
From the Main Menu screen, select the Diagnostics option by pressing <2> on the keypad.