manual

terMinal StatuS
157
reStore paraMeterS froM eXternal Storage
DeviCe
aCCeSS inStruCtionS:
From the Terminal Status screen, select the Restore Parameters from External Storage Device option by
pressing <7> on the keypad.
DeSCription:
The Restore Parameters from External Storage function restores a previously saved set of parameters from
an external storage device (jump drive).
D Install the jump drive into any unused USB port.
D Select <7> on the keypad. The prompt shown below appears. Press <enter> to continue.
D look in: Press <1> to cycle through the destinations of the saved parameter le. Select “USB Device”.
D fileS of type: Press <2> to select the saved parameter le type and name. Use the arrow keys to move
up/down in the list of les. Press <enter> to select the highlighted le.
D The saved parameters will be loaded on the terminal. At the conrmation dialog, remove the jump drive.