manual
8
X2 cOnfiguratiOn Manual
Many Management Functions, such as Close, Journal and Diagnostics functions produce a report
summarizing the results of the operation. Most reports are displayed in a Management Report dialog, which
can viewed on screen, printed to the receipt printer (if applicable) or saved to an external memory device
(USB jumpdrive).
Note: If saving to an external memory device, the device must be installed in the USB port BEFORE saving
to the device.
The buttons on the Management Report dialog let you perform the following actions:
Management Reports
Page Up - Scrolls the report up a maximum of one
full page.
Home - Moves directly to the rst page of the report.
Print - Sends the report to the terminal receipt printer
for hardcopy output.
Page Down - Scrolls the report down a maximum of
one full page.
End - Moves directly to the last page of the report.
Save to File - Saves the report as a text le to an
external memory device.
Required Parameters
The following Parameters minimally need to be congured to enable a “live” transaction:
• Terminal ID Number
• Communication Properties
These parameters do not take in to account any additional processor requirements. Refer to the processor’s
setup requirements for any additional parameter settings.
Note: Upon completion of the ATM installation and terminal conguration, recommend accessing the
Diagnostics menu to check the status and test various hardware items (Dispenser, Printer, Card
Reader, etc...).
• Pin Working
• Pin Master Key