manual
Terminal ConfiguraTion
137
emv Card opTions:
3. iCC laTChing- When enabled (checked), the EMV card reader will latch the EMV card during a
transaction.
D Press <3> to toggle between enabled (checked) or disabled (unchecked).
4. non-iCC TransaCTions- When enabled (checked), the terminal will process magnetic stripe-only
transactions.
D Press <4> to toggle between enabled (checked) or disabled (unchecked).
5. iCC fallBaCk To magneTiC sTripes- When enabled (checked), the terminal will process the
transaction using magnetic stripe if the IC fails on the card.
D Press <5> to toggle between enabled (checked) or disabled (unchecked).
emv Card opTions:
6. emv j
ournal enTries- When enabled (checked), the terminal will record the extra data that is
received and transmitted during an EMV transaction to the journal for dispute resolution.
D Press <6> to toggle between enabled (checked) or disabled (unchecked).
7. Terminal emv ConfiguraTion- This option displays a
management report of all the EMV kernel settings.
D Press <7> to display the EMV conguration report.
8. lasT TransaCTion’s emv daTa- This option displays
a management report of all the EMV items that were in
the last EMV transaction. This data will only appear if
the terminal has not been rebooted since the last EMV
transaction.
D Press <8> to display the last EMV transaction data.