manual

132
X2 ConfiguraTion manual
DesCripTion:
The Triton Connect option allows the terminal operator to perform the following functions:
1. primary phone # / hosT ip address (required enTry)- The Primary Phone Number is a telephone
number (usually) or some other number that is used to contact a Triton Connect host. If this number is
busy or no answer, the backup number (if required) will be used.
The Host IP Address is the IP Address of the server that will be used to contact the Triton Connect host.
The address consists of a sequence of four groups of numbers. Each group can be up to three (3) digits
long, and each group is separated by a period (dot character). (ex: 123.3.12.99)
NOTE: The IP address is provided by your host processor/network.
D Press <1> on the keypad. Enter the phone number or IP address (whatever is applicable) in the data
entry dialog prompt. Press <
enTer> when completed.
2. BaCkup phone # / hosT ip porT (required enTry)- The Backup Phone Number (if required) may be
used to provide an alternate means of contacting the host processor if the primary fails contact.
The Host IP Port is the port number where the Host IP Address will be listening to process the terminal
transactions. The port number is provided by your host Network Administrator. The port number
consists of ve (5) digits or less.
NOTE: The Port address is provided by your host processor/network.
D Press <2> on the keypad. Enter the backup phone number or IP Port address (whatever is
applicable) in the data entry dialog prompt. Press <
enTer> when completed.
3. alarm moniTor (primary) / alarm ip address- You may wish to use an alarm reporting monitoring
option. This would notify third-party organizations that an error condition at the terminal, for example,
has occurred.