manual

Basic OperatiOns
5
Accessing the Management Functions Menu
After intial setup, when the Customer Welcome screen is displayed, you can access the Management
Functions menu by:
1. Press the blank “Control” key three (3) times then press the “1” key on the keypad. After a moment the
“Security Login” screen will be displayed.
With the release of newer software, you will
experience a new error code. Error Code 246 has
been created for when the terminal’s Master Password
is in its default state. The terminal will detect this
condition and go out of service.
On the “Out Of Service” screen, no error
information will be displayed. The following is a
screen capture of this state. This error code will not
clear until the Master Password is changed from its
default state.
Follow the steps on the next page for changing the
default password and clearing the error.
2. Enter your password and press “Enter”. You must enter the correct password in the dialog box that
appears when the Management Functions options is selected. The password will consist 4-12 digits.
When a valid login is entered, the Main Menu screen will be displayed.
Changing Default Passwords