manual
116
X2 ConfiguraTion manual
CommuniCaTion
aCCess insTruCTions:
From the Terminal Conguration screen, select the Communication option by pressing <6> on the keypad.
NOTE: Select option <8>, “Communication Protocol”, for your communication medium (dial-up, TCP/
IP, etc) FIRST. The Communication main screen will adjust for the selected protocol.
desCripTion:
The Communication option allows the terminal operator to perform the following functions:
1. primary phone # / hosT ip address
(required enTry)
2. BaCkup phone # / hosT ip porT (required
enTry)
3. predial / permanenT TCp/ip ConneCTion
4-5. enaBle CommuniCaTion header
6. use 12-digiT sequenCe numBer
7. amounT Type
8. CommuniCaTion proToCol
9. CommuniCaTion message formaT
0. nua numBer / hosT response TimeouT
f1-f2. enaBle persisTenT reversals
f3. enaBle reversals for proToCol errors